PluggFlex - ducts and hoses
Our specially developed and patented ducts and hoses can be quickly installed. Normally, neither shaped parts nor seals are necessary. Elbows, for example, are required only in exceptional cases, such as for the transition of PK100 in the wall to make sure the minimum bending radii are observed.
Horizontal PluggFlex ducts are usually installed as air supply lines from the distributor. They are concealed under the screed. The individual exhaust air inlets are normally connected vertically with the PluggFlex hose and led to the exhaust plenum only on the level of the ventilation unit (cellar, attic). Cross-overs are avoided in this way.
|
PluggFlex-duct |
|
|
PluggFlex-hose |
